hardly worn anode (magnesium) |
Newly coated rudder |
The report also indicates that, from the index number, the boat was biult in 1982. I think we knew tyhat but a previous survey had said 1984. Hence this was a 32-year inspection!
The main probem is the damp bilge. We must find a way of keeping it dry and ventilating it. The surveyor suggests removing the fixed steps and fitting removable ones that could be remived to provide access to a 400mm square hatch in the floor.
Removing the rot from the back of the boat and replacing the floor fills me with dread but will provide the opportunity for a much needed re-fit of the aft end of the boat, sorting out the outdated shower oom. A lot of thought needs to be put into this.
One interesting recommendation is to have the hull shot blasted and coated with an epoxy resin coating at the next "out of the water" opportunity. Sounds expensive.
The "cosmetic" welding to the port bow rubbing strake/eybrow was completed by Tooley's this morning so I went down, collected my Invoice and keys and took the boat cback to the mooring. The 1/4mile cruise didnt even get the engine to oprarting temperature so I left her idling for a while to charge the batteries whike I chatted to three crews of other boats inteh mmoring. The sun has brough all out. The chatter put another hour on the hours run metre!
Now all I have to do is pay the bill.
No comments:
Post a Comment